A low power and low phase-noise 91~96 GHz VCO in 90 nm CMOS

This paper reports a 94 GHz CMOS voltage-controlled oscillator (VCO) using both the negative capacitance (NC) technique and series-peaking output power and phase noise (PN) enhancement technique. NC is achieved by adding two variable LC networks to the source nodes of the active circuit of the VCO. NMOSFET varicaps are adopted as the required capacitors of the LC networks. In comparison with the conventional one, the proposed active circuit substantially decreases the input capacitance (C_in) to zero or even a negative value. This leads to operation (or oscillation) frequency (OF) increase and tuning range (TR) enhancement of the VCO. The VCO dissipates 8.3 mW at 1 V supply. The measured TR of the VCO is 91~96 GHz, close to the simulated (92.1~96.7 GHz) and the calculated one (92.2~98.2 GHz). In addition, at 1 MHz offset from 95.16 GHz, the VCO attains an excellent PN of – 98.3 dBc/Hz. This leads to a figure-of-merit (FOM) of ?188.5 dBc/Hz, a remarkable result for a V- or W-band CMOS VCO. The chip size of the VCO is 0.75 × 0.42 mm², i.e. 0.315 mm².     

风速时间序列混沌判定方法比较研究

混沌识别是对非线性时间序列进行混沌预测的前提。针对时间序列风速确定性与随机性相结合的复杂非线性特征,研究了不同的混沌识别方法,并对风速时间序列进行混沌特征识别。应用随机噪声、周期运动及经典混沌系统的时间序列对所选方法进行可靠性验证。对美国国家风能研究中心M2测风塔实测时间序列风速数据进行非线性混沌特征识别。结果表明:风速时间序列具有明显的混沌特征;各风速时间序列表现出不同程度的混沌特征;各混沌识别方法对风速时间序列混沌特征的表达形式不同,互为补充,相互验证。     

阳泉矿区煤样不同应力状态下声发射特性分析

为探索原煤煤样的力学性能和不同应力状态下的声发射活动特性,对阳泉矿区新景矿、平舒矿主采煤层的煤样进行了单轴、三轴压缩和巴西劈裂的声发射试验,分析了2种煤样力学性能及不同加载过程的声发射活动规律。证明通过监测声发射(微震)活动分析煤样或煤岩体内部破坏状态是一种方便有效的手段。     

Beta-Binomial删除信道中的喷泉码文件传输协议

由于命名数据网络(NDN,Named-Data Networking)无环路、逐包、逐跳转发的特点,使得数据包回传成功率降低,而传统的TCP/IP协议中的ARQ和ACK机制对于多播会话不再适用.由于NDN中的传输信道可以等效为二进制删除信道,因此可以通过应用层编码来实现文件的可靠传输.传统的信道编码技术如卷积码、级联码和RS码等复杂度较高,而将NDN与低复杂度的喷泉码的结合可以实现分布式的存储架构,因而可通过喷泉编码在应用层协议中实现可靠的纠删机制,保证整体文件的传输可靠性.以往的研究一般是基于确定的删除概率信道模型,但是由于网络的异构性和信道噪声等因素影响,可能会造成信道丢包概率呈随机性分布.因此,本文在Beta-Binomial分布模型的前提下,根据贝叶斯统计的先验信息和中心极限定理,对随机概率下的纠删信道的文件可靠传输协议进行了数学建模和理论推导.仿真结果显示此模型更具有普适性,此传输协议可在信道状况未知的前提下从理论上求出最小发包数,减少冗余编码包,提高文件整体的投递成功率,在保证传输可靠性的同时有效提升协议传输效率.     

Developing microencapsulated 12‐hydroxystearic acid (HSA) for phase change material use

Phase change materials (PCM) have an increasingly more important role as a thermal energy storage (TES) media. However, leakage problem of PCM causes limitation during their integration in TES systems. Therefore, the encapsulation of PCMs is attracting research interest to extend usage of PCMs in real TES applications in recent years. In this study, hydroxystearic acid (HSA) was encapsulated with polymethyl methacrylate (PMMA) and different PMMA comonomer shells via emulsion polymerization method for the first time in literature. HSA with high melting temperature range (74–78°C) can widen the scope of using PCMs, and the encapsulated form can make it more versatile. The chemical structures, morphologies, and thermophysical properties of capsules were determined by FT‐IR, SEM, DSC, TGA, and thermal infrared camera. Among the produced HSA capsule candidates, PMMA‐HEMA is the most promising with latent heat of 48.5 J/g with melting range of 47 to 85°C. SEM analysis indicated that the capsules have spherical shape with compact surface at nano‐micro (100–440 nm) size range; however, some capsules exhibited agglomeration.     

肉桂特色资源加工利用产业发展现状

肉桂是我国特色经济林树种，我国肉桂种植面积和年产量均居世界首位。我国肉桂主要分布在两广地区，其中广西为14.9万hm²，广东为8.9万hm²，两地面积占全国肉桂分布总面积的95%以上。肉桂既是著名的香料又是传统的名贵中药，具有极高的经济价值，发展肉桂产业对于促进农民增收、维护健康中国有着重要的意义。本研究综述了肉桂资源量、分布情况及主要利用部位，介绍肉桂主要产品（如桂皮，桂枝，肉桂粉及肉桂油）及加工技术现状、产品质量控制及其分析检测方法，分析了产业未来的发展趋势，并提出了产业发展的对策和措施：加强肉桂标准化示范基地建设，提高优质资源供给能力；提高肉桂加工利用技术水平，延长产业链；培育肉桂龙头企业，提高产品市场竞争力。为我国肉桂特色资源加工利用产业的可持续发展提供一定的思路。     

Experimental investigation on the plasma morphology of ablative pulsed plasma thruster with tongue-shaped and flared electrodes

Ablative pulsed plasma thrusters(APPTs) are considered as an attractive propulsion option for station-keeping and drag makeup purposes for mass-and power-limited satellites. In order to understand the physical mechanism of APPTs, high-speed camera and optical emission spectroscopy are utilized to investigate the plasma characteristics including the spatial distribution and composition between the electrodes. The plume images and spectra at different times and positions are experimentally recorded, and the spatial distribution, composition, and trajectory of plasmas can be concluded through analyzing them. With the increase of the distance from the ablation surface, two clusters of plasmas near the anode and cathode meet downstream,and the species and density of plasmas tend to be uniform.     

袋装水泥装车机及拨板机构的设计与研究

针对袋装水泥装车半自动化问题，设计一款全自动装车机。首先，根据袋装水泥车间生产状况，确定水泥装车方案，即采用抽屉式逐层装车原理，利用ＳｏｌｉｄＷｏｒｋｓ创建装车机三维模型；其次，为使水泥包快速准确地到达指定位置，针对拨板机构中的分拨板及导柱进行受力分析，建立其力学模型，推导出应力公式；最后，通过 ＡＮＳＹＳ有限元软件进行分拨板的力学仿真，为后续的优化设计提供依据。     

A first-principles investigation on mechanical and metallic properties of titanium carbides under pressure

The titanium carbides are potential candidates to achieve both high hardness and refractory property. We carried out a structural search for titanium carbides at three pressures of 0 GPa, 30 GPa and 50 GPa. A phase diagram of the Ti-C system at 0 K was obtained by elucidating formation enthalpies as a function of compositions, and their mechanical and metallic properties of titanium carbides were investigated systematically. We also discussed the relation of titanium concentration to the both mechanical and metallic properties of titanium carbides. It has been found that the average valence electron density and tractility improved at higher concentrations of titanium, while the degree of covalent bonding directionality decreased. To this effect, the hardness of titanium carbide decreases as the content of titanium increases. Our results indicated that the titanium content significantly affected the metallic properties of the Ti-C system.